FP40 / FP40-D Specifications SINE SIGNAL Frequencies Normal Sweep 1/12 octave frequencies from 200 to 8000 Hz, closest 100 Hz, within 1% Fast Sweep 1/3 octave frequencies closest 100 Hz Warbled Sinewave Has 5%, 33-1/3 Hz warble Short Sweep 1/2 octave frequencies closest 100 Hz Amplitude (RMS) Coupler mode: 40 dB SPL through 100 dB SPL in 5 dB steps. Probe mode: 40 dB SPL through 90 dB. Accuracy at reference point, after leveling, 2.5 dB for 500 Hz through 3500 Hz; 3.5 dB for all other frequencies. Harmonic Distortion (at 70 dB SPL) Less than 0.5% for 500, 800, & 1600 Hz. COMPOSITE SIGNAL (optional) Frequencies From 200 Hz to 8000 Hz in 100 Hz intervals. Accuracy within 1%. Amplitude Coupler mode: (RMS) 40 dB SPL through 100 dB SPL in 5 dB steps.   Probe mode: 40 dB SPL through 90 dB. Accuracy at reference point, after leveling, 2.5 dB for 0.5 kHz through 3.5 kHz; 3.5 dB for all other frequencies. Crest Factor Less than 9 dB. BATTERY CURRENT MEASUREMENT Measurement Range 0 mA to 25.5 mA. Current Limit 55 mA. Accuracy 3% of full scale ±1 digit. Resolution 0.1 mA. Simulated Battery Types 10 A/230, 13, 312, 5, and 675 zinc air; 13, 312, 675, and 41 mercury; 13, 312, 76 silver; AA Battery Voltages Supplied 1.5 V for silver oxide and AA, 1.3 V for mercury and zinc air. Tolerance ±0.01V, no load. DIGITAL READOUT OF SPL Frequency Range 200 Hz through 8000 Hz. Amplitude Range 0 dB SPL through 149.9 dB SPL, -70 dB through +100 dB gain. Max Input Signal 150 dB SPL. Resolution 0.1 dB Type True RMS. Accuracy From 250 Hz to 2500 Hz, 2 dB ±one digit. All other frequencies, 3 dB ±one digit. HARMONIC DISTORTION ANALYSIS Type 2nd, 3rd, and 2nd + 3rd = total. Resolution . 1% Reading Percent with respect to total signal. Readings made at frequencies from 400 through 2500 Hz. SYSTEM NOISE Equivalent Input Noise 50 dB SPL RMS. Noise Reduction Signal averaging synchronized with the signal generator. Averaging factors: off, 2, 4, 8, or 16. Random noise will be reduced by an amount equal to the inverse square root of the factor chosen. POWER REQUIREMENTS Voltage 90 VAC to 264 VAC. Frequency 50 Hz to 60 Hz. Power Dissipation 40 VA at 120 VAC, 60 Hz input, normal operation, 55 VA while printing. BATTERY OPERATION (optional) Operating Time: 3 hours continuous on battery power (with new battery at 25 degrees C). Auto Shutdown General shutdown after no operation of controls for 15 minutes (battery operation only). Battery Charger Built-in automatic battery charger. Full charge in 10 hours. SOUND CHAMBER Test Area 3 1/2" x 5 1/2" (8.9 x 13.9 cm) DISPLAY SCREEN Backlit Liquid Crystal Display Graphical display, 640 pixels wide x 200 pixels high. Display angle adjustable. HIGH SPEED THERMAL PRINTER Print Speed Screen copy in 14-19 seconds. Paper Width 60 mm EXTERNAL CONNECTORS Jacks RS232 (9-pin), probe monitor earphone (1/4" stereo), external speaker jack (3.5 mm stereo phone), VGA CRT (15 pin). PHYSICAL DESCRIPTION Dimensions 20.125" x 14.750" x 6.5" (50.5 x 36.9 x 16.25 cm) (with lid on case). Color Light grey with black trim, white control panel. Weight 5 pounds (11,40 kg) with lid and battery; 22 pounds (10 kg) without battery. GUARANTEE The FONIX FP40 and its accessories are guaranteed to be free from manufacturing defects which would prevent the products from meeting these specifications for a period of one year from date of purchase. Accessories and Options FP40: Standard Accessories Operator's Manual HA-1, HA-2 couplers Battery pills #675/65, 312, 10A/230 FM40 microphone Fun-Tak Ear level adapter Roll of printing tape Lid with accessories compartments 14mm to 1" adapter VGA monitor capability   Standard with Probe Option Monitor headset Wedge ear hook Calibration clip Probe calibration adapter M250 probe microphone assembly Set of 25 probe tubes Felt pen-dry erase Mounting sleeve   Optional Accessories External printer kit Swing arm, speaker and cable Telewand for ANSI 96 Telecoil induction board Quest CQ-10 sound level calibrator Maintenance Manual (on request at time of purchase) Children's wedge ear hook 6010 sound chamber Battery pills #41, 5/5A, AA FM kit VGA monitor Insert Earphone Kit   Options Composite Option Probe Option (Real Ear)   Battery Pack Option ID Option RS232 Option OES (Occluded Ear Simulator) Option CIC Option with coupler WinCHAP software IEC, ANSI 87, ANSI 96, JIS, ISI test sequences (one standard, others at extra cost.) DSL/Link programming Safety Approval UL 544 available on request at no additional charge FP40-D: Standard Accessories (Same as FP40, with these exceptions:)   Add: All accessories standard with FP40 Probe Option except monitor headset. Exclude: Battery pills Lid with accessories compartments Carrying handle   Optional Accessories (Same as FP40, with these exceptions:) Add: Battery pills #13, 675/76, 312, 10/230 Soft carrying case     Options (Same as FP40, with these exceptions:) Exclude: Probe Option (standard on FP40-D) Battery Pack